NJ Takes Serious Steps to Prevent Harmful Algal Blooms

Photo by: Lake Hopatcong Commission

Last year, there were more than 70 suspected and 39 confirmed Harmful Algal Blooms (HABs) in New Jersey, which is significantly higher than the previous two years. New Jersey wasn’t the only state impacted by HABs. The increase caused severe impacts on lakes throughout the country, resulting in beach closures, restricting access to lake usage, and prompting wide-ranging health advisories.

In November, New Jersey Governor Phil Murphy and officials from the New Jersey Department of Environmental Protection (NJDEP) announced a three-pronged, $13 million initiative to reduce and prevent future HABs in the state. As part of the initiative, NJDEP hosted its first regional HABs Summit with the goal of prevention by improving communication throughout lake communities and sharing information ahead of the warmer months when HABs begin to appear.

The summit, which was held on January 28, 2020 at NJDEP’s Pequest Trout Hatchery and Natural Resource Education Center in Warren County included a Q&A panel discussion, information resource tables for one-on-one discussions, and presentations from a variety of NJDEP representatives and environmental experts. Princeton Hydro’s  Director of Aquatics and regional HABs expert Dr. Fred Lubnow’s presentation focused on how to properly and effectively manage HABs.

According to Dr. Lubnow, “Managing loads of phosphorous in watersheds is even more important as the East Coast becomes increasingly warmer and wetter thanks to climate change. Climate change will likely need to be dealt with on a national and international scale. But local communities, groups, and individuals can have a real impact in reducing phosphorous levels in local waters.”

In a recent press release from Governor Murphy’s office, the NJDEP Chief of Staff Shawn LaTourette said, “We will reduce HABs by working closely with our local partners on prevention and treatment techniques, while relying on the best available science to clearly communicate risk to the public. Our new HABs initiative will enhance the Department’s ability to evaluate statewide strategies and increase the capacity of lake communities to reduce future blooms.”

New Jersey’s new HABs initiative is comprised of three main components:

Providing Funding:

More than $13 million in funding will be available to local communities to assist in preventing HABs, including:

  • $2.5 million will be available as matching funds for lakes and HABs management grants, including treatment and prevention demonstration projects.

  • Up to $1 million in Watershed Grant funding will be made available for planning and projects that reduce the nonpoint source pollution, including nutrients, that contribute to HABs in surface waters of the State.

  • $10 million in principal forgiveness grants will be offered through the Clean Water State Revolving Fund for half of the cost, capped at $2 million, of sewer and stormwater upgrades to reduce the flow of nutrients to affected waterbodies.

Increasing Expertise & Implementing Prevention Tactics:

Per the Governor’s press release, “the second element of the initiative is to build upon the state’s scientific expertise and enhance its capacity to respond to HAB events. This includes establishing a team of experts from across various sectors to evaluate the state’s strategies to prevent HABs and pursuing additional monitoring, testing and data management capacity.”

Connecting with Communities:

The third component is focused on increasing NJDEP’s ability to communicate with affected communities. The regional HABs Summit held on January 28 was one of two Summits that will occur in early 2020 (the date of the next Summit has not yet been announced). NJDEP has also developed new web tools to provide HABs education, offer a forum to discuss and report potential HAB sightings, and better communicate HAB incidents.

To learn more about New Jersey’s new HABs Initiative, click here. To learn more about HABs, check out our recent blog:

Identifying, Understanding and Addressing Harmful Algae Blooms

FREE DOWNLOADS: Mid-Atlantic Stream Restoration Conference Presentations

The Resource Institute hosted its 9th Annual Mid-Atlantic Stream Restoration Conference in Baltimore, Maryland, where water resource professionals, researchers, and practitioners come together for three days to share ideas and learn about stream restoration planning, assessment, design, construction, evaluation, and other topical stream issues. The conference, which was themed Building Resilient Streams in the Mid-Atlantic and Northeast regions, included presentations, discussions, exhibits, and pre-conference workshops. Princeton Hydro participated in three presentations on a variety of topics. Below, we provide a synopsis and free download of each presentation:

Innovative Design and Funding Approaches for Dam Removal Projects Where an Unfunded Mandate Exists

Lead Presenter: Kirk Mantay, PWS, GreenTrust Alliance, Inc.
Co-Authors: Geoffrey Goll, P.E.; Princeton Hydro President; John Roche, Maryland Department of Environment; and Brett Berkley, GreenVest.

The presentation provides a detailed look at the removal of the Martin Dam in Fallston, Maryland, and how project partners were able to drastically expand the footprint of this emergency dam removal to generate enough ecological restoration benefits to adequately fund the dam removal itself.

The Martin Dam was constructed in 1965 as part of USDA’s sustainable farms pond construction initiative, which promoted aquaculture and subsistence fish production on small farms across the region as an income source for agricultural producers. Dam-related impacts included the permanent loss of spring-fed sedge wetlands, ditching of forested floodplain wetlands, pollution from stream bank entrenchment, and thermal impacts to a wild brook trout population downstream.

Overtime, the dam structure began to degrade. With each state and local agency inspection that was conducted, the dam increased in hazard category. In 2016, the Maryland Department of the Environment (MDE) was forced to list the dam as a, “public safety hazard at risk of immanent failure.” The landowner, unable to fund the dam removal, contacted GreenTrust Alliance (GTA), a regional green infrastructure nonprofit organization, for help.

By emphasizing the ecological benefits of restored wetlands and streams above and below the dam as well as the critical public safety hazard faced by residents and motorists downstream, GTA, in partnership with Princeton Hydro and GreenVest, was able to secure restoration funding for the site. The design and permitting was lead by Princeton Hydro, and the dam was safely breached as part of restoration construction in January 2019.

Learn more and download the full presentation.

 

Columbia Lake Dam Removal; Using Drones for Quantitative Evaluation of River Restoration

Lead Presenter: Beth Styler-Barry of The Nature Conservancy
Co-Authors from Princeton Hydro: Geoffrey Goll, P.E., President; Casey Schrading, EIT, Staff Engineer; Kelly Klein, Senior Project Manager, Natural Resources; and Christiana Pollack, CFM, GISP, Senior Project Manager, Environmental Scientist.

In order to explore the use of drone or UAV technology to evaluate the effects of dam removals, the presentation showcases the Columbia Lake Dam removal, the largest dam removal in New Jersey to date.

The Columbia Lake Dam, built in 1909, was 18 feet high, 330 feet long dam, and stretched more than 1.5 miles on the Paulins Kill less than 0.25 miles upstream from its confluence with the Delaware River. As part of The Nature Conservancy’s (TNC) mission to improve the quality of the Paulins Kill, removing this “first blockage” was the cornerstone of the larger mission. Princeton Hydro served as the engineer-of-record, designing and permitting this project. Dam removal activities commenced in 2018 and were finalized in 2019. Its removal opens 10 miles of river for fish migration and improves recreation access, floodplain reconnection, habitat enhancement and higher water quality.

TNC will conduct five years of monitoring, a vitally important component of this project, to determine long-term ecological uplift, short-term positive and negative effects, and to develop data to provide information for future dam removals. And, as a result of the programmable and repeatable nature of drone flight paths, such monitoring will be able to be conducted for years and decades, producing invaluable data for research and future project design.

The presentation reviews the various parameters investigated, the results and significance of the data retrieved, and recommendations for the use of drone technology for future ecosystem restoration projects.

Learn more and download the full presentation.

Modeling 3D Rivers in AutoCAD to Enhance Design and Deliverables

Lead Presenter: Daniel Ketzer, PE, Princeton Hydro Senior Project Manager, River Restoration
Co-Authors from Princeton Hydro: Eric Daley, Water Resources Engineer; Cory Speroff, MLA, ASLA, CBLP, Landscape Designer; and Sumantha Prasad, PE, ENV SP, Water Resource Engineer

This presentation provides an overview on how to create 3D river models based on geomorphic input to enhance the overall accuracy and quality of a river restoration project.

In river restoration, the proposed geometry of the river channel is the key part of the design. It impacts earthwork, utility conflicts, plan set layout, and many other aspects of the project. In larger projects with reaches measuring thousands of feet and greater, manual grading is extremely time consuming and tedious; and determining the entire implication of the proposed design is difficult to achieve when simply analyzing proposed cross-sections and profiles. To increase efficiency and maintain uniformity throughout the subject reach developing a 3D-surface model of the proposed restoration reduces design time and increases quality. AutoCAD Civil 3D can be used to convert the proposed profiles and cross-sections from a geomorphic design into a 3D surface of the river corridor.

The presentation goes through the key steps that need to be taken and strategic questions that need to be asked when modeling 3D rivers in AutoCAD along with important tips and reminders.

Learn more and download the full presentation.

Stay tuned for our Spring Events Spotlight to learn how you can participate in upcoming environmental events! Click here to read more about Princeton Hydro’s river restoration services.